• It can be used on roughcast on the interior facades of all buildings.
• It provides fast preparation and easy application. • It has high resistance to cracking. • It has high water vapor permeability. • It produces surfaces that are not affected by moisture. • It has higher adherence and strength compared to plaster and plaster-based
mixtures.
• After the rough plaster application, it is mixed with Satin Paste and provides a
suitable surface for the final coat Satin Paste.
PREPARATION OF THE SURFACE
The application surface should be clean; the surface should be free from dust and
mold oil.
• If there are defects and deep cavities on the surface before application, they
should be repaired
• with the same product one day before
• If lath strip is to be applied to the wall, the laths must be fixed to the surface at
least 1 day before the application.
• If the surface is too hot or absorbent under the influence of the sun, it should be
wetted.
• WERIMIT WEPRIME-GROSS is applied on exposed concrete surfaces before the
application and the application is started after primer’s drying.
STANDARD NO
• TS EN 998-1 / LW – 06.02.2017
COLOR
• White