AREAS OF UTILIZATION
• On the interior and exterior of all buildings; in sheathing systems, it is used on
•WERIMIT THERMAMIT-PLAST, on properly mastered rough plaster, on trowelled
applied finish plaster, as a final coat with grain-textured decorative plaster.
ADVANTAGES OF THE PRODUCT
• It has a natural and decorative appearance.
• It has high water vapor permeability, and it breathes.
• It is water repellent and resistant to severe climatic conditions.
• Due to its special particle size distribution, it creates a natural and decorative filling
on the surface.
• It is polymer added.
• Application surfaces should be clean and free from dust. Anti-adhesion materials
should be cleaned from the surface, mortar cement residues should be scraped off.
• Cracks and gaps on the surface should be repaired at least one day before
application with WERIMIT WETECH-REPAIR.
• In very hot and windy weather, the application surface should be saturated with
water.
• WERIMIT WEPRIME SATIN should be applied to the surface with a roller or brush at
least 12 hours before the application.
STANDARD NO
• TS 7847/14.06.2012