Runway).
• It is fiber reinforced.
• It does not shrink.
• It reaches high compressive strength in a short duration after application.
• It can be easily applied at a thickness of 5-100 mm.
• It provides high adherence on concrete and plastered surfaces.
• It has high resistance to water and frost.
• It provides easy application.
• It provides the possibility of horizontal and vertical repair in concrete.
PREPARATION OF THE SURFACE
• Oil, dirt or materials that prevent adhesion should be cleaned from the surface,
materials such as mortar cement residues etc. should be scraped of and the
surface should be free of dust.
• If necessary, the application surface should be cleaned with water.
• In very hot and windy weather, the surface should be saturated with water.
• Before the application, WERIMIT WEPRIME-SATIN should be applied to the surface
in order to get a good result.
• Rust on the reinforcement to be repaired should be cleaned and dust free with the
help of a steel wire brush. The contact of the reinforcement bars with the concrete
should be cut off and at least 2 layers of WERIMIT WEPRIME-SATIN should be
applied with the help of a brush.
STANDARD NO
• TS EN 1504-3/R4-20.04.2006