gaps that may occur between old and new concrete.
• It fills the gaps that are difficult to access due to its fluidity and can be easily
applied with a pump.
• Prevents shrinkage after setting.
• It reaches to high strength and adherence in a short duration after application.
PREPARATION OF THE SURFACE
• Application surfaces should be clean and in good condition.
• The surface should be free of residues and dust that will prevent adhesion.
• Considering the working time, enough material to be used should be prepared.
• Care should be taken that there is no water on the surface.
• If an application is to be made on the old concrete surface, the surface must be
moistened before the application.